HW-09 · Corner, right handing
Right-deep corner cabinet
The right-hand counterpart: 1,075 mm deep corner cabinet with the false door on the right side panel. Order it with HW-08 where a run turns twice, and pick the handing to match the direction the counter travels.
- Width
- 1075
- Depth
- 656
- Height
- 900
Prices are quoted per order — module mix, finish, counter and freight all move. A quote is valid 15 days.
Catalogue & dimensions
PDF with the full module range and the appliance cut-out library.
Specification
HW-09 in numbers
Millimetres, as supplied. Every module shares 900 mm height and the 2.5 inch castor line, so any two line up without packing.
| Body width | 1075 mm |
|---|---|
| Body depth | 656 mm |
| Body height | 900 mm |
| Fits | The turn in an L or a U shaped run |
| Castors | 2.5 inch, standard |
| Panel build | 0.45 mm 304 stainless both faces over aluminium honeycomb core |
| Panel thickness | 18 mm cabinet body, 20 mm door and end panel |
| Colour range | Standard colour card, or matched to sample at an extra charge |
Figures are the finished cabinet dimensions from the standard range. Where a module departs from the common 656 mm depth it is stated on the module page, not averaged.
Deciding
The mirror, and when it is the right choice
Same geometry as HW-08, handed the other way. The mistakes are different, so read the four points rather than skimming.
What right-hand actually means
Facing the front of the run, the corner cabinet whose closed face is on your right is HW-09. The counter comes in from the left and the return goes off to the right. The geometry is the same 1,075 mm; only the handing differs.
A U-shape needs one of each
A U-shaped kitchen uses one HW-08 and one HW-09. Ordering two of the same handing is the commonest mistake on a U-shape drawing, and it cannot be corrected on site — the false door ends up facing the wall.
Wrapping a column or a chimney breast
Where a structural column interrupts the wall, a right-hand corner is often the module that gets around it: the return carries the run past the obstruction and back to the wall. Measure the column, not only the wall-to-wall distance.
The sink is usually on the right leg
Drainage decides this more often than cooking does. If the waste leaves to the right, put the sink on that leg and let HW-09 carry the turn; the alternative is a diagonal pipe inside a 656 mm carcass, which wastes the bay behind it.
Straight answers
Questions about this module
How do I choose between HW-08 and HW-09?
Stand facing the front of the run. If the corner needs its closed face on your right, order HW-09. The two are mirror images and cannot be converted on site.
Can I use two of the same handing?
Only if the run turns the same way twice, which is unusual. A U-shape takes one of each.
Does the corner change the counter?
Yes. The corner module usually takes a continuous worktop piece that turns with it, so it has to be priced in from the start.
Adjacent modules
What usually sits next to it
Because every module shares the same height and depth, any of these lines up without adjustment.
Page last updated · Reviewed by the BOGEQI technical team, Foshan Bogeqi Cabinetry Co., Ltd.